The PRO-MSW is designed for use on industrial cantilever, single or bi-parting swing gates.
When ordering a PRO-MSW operator, supply us with the following information:
- Type of gate
- Gate width
- Duty
- Horsepower
- Mounting (LH or RH, inside looking out)
- Model
- Voltage/Phase
- Safety devices
- Options
Mechanical dimensions
- 2 year warranty
- Heavy duty reversing contactor complete with mechanical & electrical interlock
- Continuous duty industrial motor
- Timer to close, run·out timer, 1.5 sec time delay, 100VA transformer, control circuit, ON/OFF switch
- Heavy duty worm gear 60:1 running in oil bath
- Heavy duty 5L V-belt
- Solenoid actuated brake system
- 3 phase thermal overload relay protection (for 3-phase operators)
- 1-1/4″ cast iron flange pillow block bearings on drive shafts
- 24V fused control circuit
- Adjustable swing arm
- Fully adjustable rotary limit switches
- Motor removable without affecting limit setting
- Emergency hand crank with electrical cutout for manual operation
- Operator housed in cabinet with hinged door & key lock
- Universal left or right hand mounting
- Post or pad mount installation
- Mounting base (optional)
- Gate attachement brackets and U-clamps
- Baked on dark grey coat
- Shipping weight: 250 Lbs
| Model | Code | Horsepower (HP) | Voltage (V) | Phase (Ph) | Frequency (Hz) |
| PRO MSW | 50-11 | 1/2 | 115 | 1 | 60 |
| PRO-MSW | 50-21 | 1/2 | 230 | 1 | 60 |
| PRO-MSW | 50-23 | 1/2 | 208/230 | 3 | 60 |
| PRO-MSW | 50-43 | 1/2 | 460 | 3 | 60 |
| PRO-MSW | 50-53 | 1/2 | 575 | 3 | 60 |
| PRO-MSW | 75-11 | 3/4 | 115 | 1 | 60 |
| PRO MSW | 75-21 | 3/4 | 230 | 1 | 60 |
| PRO-MSW | 75-23 | 3/4 | 208/230 | 3 | 60 |
| PRO-MSW | 75-43 | 3/4 | 460 | 3 | 60 |
| PRO-MSW | 75-53 | 3/4 | 575 | 3 | 60 |
| PRO-MSW | 100-11 | 1.0 | 115 | 1 | 60 |
| PRO-MSW | 100-21 | 1.0 | 230 | 1 | 60 |
| PRO-MSW | 100-23 | 1.0 | 208/230 | 3 | 60 |
| PRO-MSW | 100-43 | 1.0 | 460 | 3 | 60 |
| PRO-MSW | 100-53 | 1.0 | 575 | 3 | 60 |
| Option Code | Description |
| MW00049 | Mounting Pad |
| MK00266 | Heater 110V 12SW complete with adjustable thermostatUsed for 11 OV, 460V or S7SV power supplyNote: Seperate transformer required for 460V (MK00223) or for S7SV (MKOOl 00) |
| MKOOS16 | Heater 220V 200W complete with adjustable thermostatUsed for 220v l-phase or 230V 3-phase power supply |
| MPOOOS1 | Master/Slave option |