![MSW Gate Operator Pro-GD](https://www.portesolympique.com/wp-content/uploads/2014/01/Gate-Operator-Pro-GD.jpg)
The PRO-GO is designed for use on commercial and industrial cantilever, single or bi-parting slide gates up to 30ft. (9m) wide.
When ordering a PRO-GD operator, supply us with the following information:
- Type of gate
- Gate width
- Duty
- Horsepower
- Mounting (LH or RH, inside looking out)
- Model
- Voltage/Phase
- Safety devices
- Options
- 2 year warranty
- Heavy duty reversing contactor complete with mechanical & electrical interlock
- Continuous duty motor with overload protection
- Timer to close, run-out timer, 1.5 sec time delay, 100VA transformer, control circuit, ON/OFF switch
- Heavy duty 5L V-belt
- Solenoid actuated brake system
- 3 phase thermal overload relay protection (for 3-phase operators)
- 1″ cast iron flange bearing on drive shafts
- 24V fused control circuit
- Adjustable in-line friction clutch
- Three button control station
- Fully adjustable rotary limit switches
- Powder metal limit cams
- Motor removable without affecting limit setting
- #50 sprockets and waterproof roller chain drive
- Emergency disconnect with electrical cutout for manual operation
- Lockable cover with key lock and provision for pad lock
- Left or right hand mounting
- Post or pad mount installation
- Gate attachement brackets and U-clamps
- Baked on dark grey coat
- Shipping weight: 22S Lbs
Model | Code | Horsepower (HP) | Voltage (V) | Phase (Ph) | Frequency (Hz) |
PRO-GD | 50-11 | 1/2 | 115 | 1 | 60 |
PRO-GD | 50-21 | 1/2 | 230 | 1 | 60 |
PRO-GD | 50-23 | 1/2 | 208/230 | 3 | 60 |
PRO-GD | 50-43 | 1/2 | 460 | 3 | 60 |
PRO-GD | 50-53 | 1/2 | 575 | 3 | 60 |
PRO-GD | 75-11 | 3/4 | 115 | 1 | 60 |
PRO-GD | 75-21 | 3/4 | 230 | 1 | 60 |
PRO-GD | 75-23 | 3/4 | 208/230 | 3 | 60 |
PRO-GD | 75-43 | 3/4 | 460 | 3 | 60 |
PRO-GD | 75-53 | 3/4 | 575 | 3 | 60 |
PRO-GD | 100-11 | 1.0 | 115 | 1 | 60 |
PRO-GD | 100-21 | 1.0 | 230 | 1 | 60 |
PRO-GD | 100-23 | 1.0 | 208/230 | 3 | 60 |
PRO-GD | 100-43 | 1.0 | 460 | 3 | 60 |
PRO-GD | 100-53 | 1.0 | 575 | 3 | 60 |
PRO-GD | 150-11 | 1.5 | 115 | 1 | 60 |
PRO-GD | 150-21 | 1.5 | 230 | 1 | 60 |
PRO-GD | 150-23 | 1.5 | 208/230 | 3 | 60 |
PRO-GD | 150-43 | 1.5 | 460 | 3 | 60 |
PRO-GD | 150-53 | 1.5 | 575 | 3 | 60 |
Option Code | Description |
---|---|
MK00266 | Heater 11 OV 12SW complete with adjustable thermostatUsed for 11 OV, 460V or S7SV power supplyNote: Seperate transformer required for 460V (MK00223) or for S7SV (MKOOl 00) |
MKOO516 | Heater 220V 200W complete with adjustable thermostatUsed for 220v l-phase or 230V 3-phase power supply |
MPOOO51 | Master/Slave option |